FREE Redline Orange Foam Polishing Pad with Purchase! Choose Your size below.
Simplify your detailing process with McKee’s!
McKee’s 37 Marine & RV Heavy Duty Cleaner Wax is a user-friendly solution to removing moderate oxidation and staining from your boat or RV. This unique formula combines the cleaning power of a heavy-cut oxidation remover with a durable synthetic wax to minimize the time you spend caring for your boat or RV, and MAXIMIZE the time you spend enjoying it! McKee’s 37 Marine & RV Heavy Duty Cleaner Wax is easy to apply and long lasting making it the obvious choice for your boat or RV.
Cleans, polishes and seals
Removes heat duty oxidation and staining
Adds long lasting protection
Use on gel coat and fiberglass
Sun-safe formula can be applied in direct sunlight
If your boat or RV is suffering from the chalky look caused by oxidation or staining, but you’ve been concerned about the level of effort it may take to correct, then we’ve got the product for you! McKee’s 37 Marine & RV Heavy Duty Cleaner Wax features advanced abrasives and nourishing polishing oils that work in tandem removing the dead, chalky oxidation leaving a smooth glossy surface behind. It even includes a synthetic wax to lock out contaminants and prevent damage from UV rays.
McKee’s 37 Marine & RV Heavy Duty Cleaner Wax was formulated in sunny south Florida and as such, its 100% sun-friendly. That means that you can work in direct sunlight and still get great results — with no hazing or decrease in working time! Apply it by hand or with a machine polisher and enjoy the results!
Apply a nickel-sized dollop of polish directly onto applicator sponge.
Vigorously rub into surface until it turns clear.
Buff to a high gloss using a microfiber towel.
Apply an X of polish directly onto a foam cutting pad.
Spread polish over a 2’ x 2’ area with the machine turned OFF. If using a rotary polisher, set speed between 1200 and 1500 RPM. If using a dual action polisher, set speed between 5000 and 6000 OPM.
Using a slow arm movement with heavy downward pressure, perform 4-5 section passes, or until the polish turns clear.